Use the ×10ˣ key
To enter 6.02 × 10²³, type 6.02, press the ×10ˣ key (labelled EXP or EE on some models), then 23. The calculator treats the whole thing as one number. On SciCalc the key is ×10ˣ, or type 6.02E23.
Why not type × 10 ^ 23?
It usually works for a single number, but inside a division it can split the number in two. 1 ÷ 6.02 × 10^23 is worked left to right as (1 ÷ 6.02) × 10²³, about 1.66 × 10²² instead of the intended 1.66 × 10⁻²⁴. With the ×10ˣ key, 1 ÷ 6.02E23 is right.
Negative powers
For 1.6 × 10⁻¹⁹, enter 1.6, ×10ˣ, then the negative sign and 19.
Reading the answer
Very large or very small results appear in scientific notation automatically, for example 3.01×1023. If you need a fixed number of significant figures, use the SCI format setting or round with the significant figures calculator.
What is the key called on my calculator?
The key has a different name on each model:
| Calculator | Key for × 10n | Scientific display setting |
|---|---|---|
| Casio fx-991CW / fx-570CW | ×10x | SETTINGS, Number Format: Sci, Norm 1 or Norm 2 |
| TI-30XS MultiView | ×10n | mode, then SCI |
| TI-84 Plus CE | EE, shown on screen as E | MODE, then Sci |
| SciCalc | ×10x, or type E | SCI format |
So 6.02 × 10²³ goes in as 6.02, the key, 23 on all of them. The TI-84 Plus CE shows it as 6.02E23. The Casio and TI keystrokes guides cover other keys on these models.
Why does 10 EE 3 give 10,000?
The key already means “× 10 to the power”. So 10 EE 3 is 10 × 10³ = 10⁴ = 10,000, ten times too big. To enter 10³ on its own, type 1 EE 3, which gives 1000. On SciCalc, 10E3 gives 10000 and 1E3 gives 1000. The same goes for small powers: 10⁻⁶ is 1 EE −6.
A worked example with three powers of ten
The energy of a photon is E = hc ÷ λ. With the rounded textbook values h = 6.63 × 10⁻³⁴, c = 3.00 × 10⁸ and λ = 5.00 × 10⁻⁷, type
6.63E−34 × 3.00E8 ÷ 5.00E−7 = 3.978 × 10−19
Each number goes in with the key, so no brackets are needed.
Why did my calculator switch to scientific notation by itself?
It switches when a result is very large or very small. The Casio fx-991CW decides by its Norm setting. Norm 1, the default, uses ×10n when the size of the answer is below 10⁻² or at least 10¹⁰. Norm 2 waits until it is below 10⁻⁹ or at least 10¹⁰. So once 1 ÷ 200 is shown as a decimal (the calculator first shows 1/200), it reads 5×10⁻³ under Norm 1 and 0.005 under Norm 2.
Other display choices are SCI and ENG. On the TI-30XS MultiView both are modes; on the fx-991CW, Sci is a Number Format setting and ENG is a conversion in the FORMAT menu. SCI puts one digit before the decimal point. ENG uses powers of ten that are multiples of 3, with 1 to 999 in front. 45,000 is 4.5 × 10⁴ in SCI and 45 × 10³ in ENG. These settings change only how answers are shown, not the values. Set the calculator back to its normal display when you are done. The engineering notation calculator converts between the two.
Reading E in an answer
A capital E in a result means “times ten to the power”: 7.4E14 is 7.4 × 10¹⁴. TI’s reference guide calls it Exponent. It has nothing to do with the number e ≈ 2.718.
Writing a number in scientific notation
Move the decimal point until one non-zero digit is left in front of it. The number of places you moved is the power of ten: positive for big numbers, negative for small ones. 450 = 4.5 × 10², 4,400 = 4.4 × 10³ and 0.000016 = 1.6 × 10⁻⁵.
Questions
What is the EXP key?
It enters “× 10 to the power”, so 6.02 EXP 23 means 6.02 × 10²³.
Why is my answer 100 times too big or small?
Often a power of ten typed with × 10 ^ inside a division. Use the ×10ˣ key or brackets.
How do I show answers in scientific notation?
Choose the SCI display format; SciCalc also switches to it automatically for very large or small results.
How do I put 6.02 × 10^23 in a calculator?
Type 6.02, press the ×10ˣ key (EE on the TI-84 Plus CE, ×10ⁿ on the TI-30XS MultiView), then type 23. On SciCalc you can also type 6.02E23.
How do you write 50,000 in scientific notation?
5 × 10⁴. Move the decimal point 4 places to the left so that one digit, 5, is left in front of it.
Why does 10 EE 3 give 10,000 instead of 1,000?
The EE key already includes the × 10, so 10 EE 3 means 10 × 10³ = 10⁴. Type 1 EE 3 for 10³.
Sources
- Casio fx-570CW / fx-991CW user’s guide (online manual): Using the SETTINGS Menu. Calc Settings > Number Format: Sci, Norm 1 (10⁻² > |x|, |x| ≥ 10¹⁰), Norm 2 (10⁻⁹ > |x|, |x| ≥ 10¹⁰). Checked 22 November 2026.
- Casio fx-570CW / fx-991CW user’s guide (online manual): Powers, Power Roots, and Reciprocals. The ×10ˣ key inputs “×10” (example 1.23 × 10³ = 1230). Checked 22 November 2026.
- TI-30XS MultiView eGuide: ×10ⁿ Key. Entering a number in scientific notation format. Checked 22 November 2026.
- TI-30XS MultiView eGuide: Modes. NORM, SCI and ENG display modes. Checked 22 November 2026.
- Reference Guide for the TI-84 Plus CE Graphing Calculator. E (Exponent): value E exponent, p. 32; Sci display mode, p. 71. Checked 22 November 2026.