How it works
A full turn is 360° or 2π radians, so 180° = π radians. That one fact gives both conversions:
radians = degrees × π ÷ 180
degrees = radians × 180 ÷ π
One radian is the angle that cuts off an arc equal in length to the radius, about 57.29577951°.
Worked example
Convert 225° to radians. 225 × π ÷ 180 = 5π/4 ≈ 3.926990817 rad. Convert π/4 radians to degrees. (π/4) × 180 ÷ π = 45°; the π cancels, so the answer is exact.
Converting a decimal radian: 2.5 rad
A wheel turns through 2.5 rad. How many degrees is that? Multiply by 180 and divide by π.
2.5 × 180 ÷ π = 450/π ≈ 143.2394488°
This time π does not cancel, so the degree value never ends. Keep 450/π if you need the exact answer, and round only at the last step.
How do you convert degrees, minutes and seconds to radians?
Change the angle to decimal degrees first. One minute (1′) is 1/60 of a degree, and one second (1″) is 1/60 of a minute, or 1/3600 of a degree. For 30° 22′ 8″:
30 + 22 ÷ 60 + 8 ÷ 3600 ≈ 30.36888889°
Now multiply by π ÷ 180 to get about 0.5300371013 rad. With Degrees → radians selected, you can type 30+22/60+8/3600 straight into the angle box and the calculator does both steps.
Common mistakes
- Using the factor the wrong way round. A full turn is only 2π ≈ 6.283185307 rad, so radian values are small numbers. If a degree angle turns into a large number, you multiplied by 180/π instead of π/180.
- Treating 3.14 as exactly π. 3.14 rad is about 179.9087477°, a little short of 180°.
- Typing 30° 22′ as 30.22°. Twenty-two minutes is 22/60 ≈ 0.3666666667 of a degree, so the angle is about 30.36666667°.
Whole radians in degrees
Each extra radian adds about 57.29577951°. After 6 rad you have gone almost a full turn.
| Radians | Degrees |
|---|---|
| 1 rad | 57.29577951° |
| 2 rad | 114.591559° |
| 3 rad | 171.8873385° |
| 4 rad | 229.1831181° |
| 5 rad | 286.4788976° |
| 6 rad | 343.7746771° |
| 7 rad | 401.0704566° |
| 8 rad | 458.3662361° |
| 9 rad | 515.6620156° |
| 10 rad | 572.9577951° |
Common angles both ways
| Degrees | Radians (exact) | Radians (decimal) |
|---|---|---|
| 30° | π/6 | 0.5235987756 |
| 90° | π/2 | 1.570796327 |
| 120° | 2π/3 | 2.094395102 |
| 135° | 3π/4 | 2.35619449 |
| 150° | 5π/6 | 2.617993878 |
| 180° | π | 3.141592654 |
| 270° | 3π/2 | 4.71238898 |
| 360° | 2π | 6.283185307 |
Tips
- Keep π in the answer when the question asks for an exact value (5π/4 rather than 3.93).
- Arc length is s = rθ and sector area is ½r²θ only when θ is in radians.
- Gradians split a right angle into 100 parts (400 in a full turn); they are rarely used outside surveying.
Questions
How many degrees is 1 radian?
180 ÷ π, which is about 57.29577951°.
Why do radians matter?
Calculus formulas such as d/dx sin x = cos x, and arc length s = rθ, only work with angles in radians.
How do I type π?
Type π or pi, for example pi/3. The π key on the main calculator inserts it too.
Is 3.14 rad 180 degrees?
Not quite. 3.14 is a little less than π, so 3.14 rad is about 179.9087477°. Only π rad is exactly 180°.
How many radians are in a circle?
2π radians, about 6.283185307. A right angle is π/2 rad.
Is 1 radian always 57 degrees?
1 radian is always the same angle, whatever the size of the circle. Its exact size is 180/π degrees, about 57.29577951°, so 57° is only a rounded value.
What is 3π/2 radians in degrees?
270°. Multiply by 180/π and the π cancels: 3π/2 × 180/π = 270.
Sources
- The International System of Units (SI Brochure), 9th edition (2019), version 4.01, BIPM. Table 4, note (b): definition of the radian; a right angle is π/2 rad; phase angle increases by 2π rad in one period. Checked 22 November 2026.
- The International System of Units (SI Brochure), 9th edition (2019), version 4.01, BIPM. Chapter 4, Table 8: 1° = (π/180) rad, 1′ = (1/60)° = (π/10 800) rad, 1″ = (1/60)′ = (π/648 000) rad; §5.4.3 example angle 30° 22′ 8″. Checked 22 November 2026.